Lab Challenge 8 – Router Config (PPPoE)

January 21st, 2016 in Lab Challenge

Let’s continue our Lab Challenge with Lab Challenge 8. This challenge is about PPPoE configuration with only two routers.

You are tasked to configure PPPoE between ISP and TUT routers with the following requirements:
+ ISP as a PPPoE Server
+ TUT as a PPPoE Client
+ Authentication using CHAP
Here is the link to access this lab challenge: http://www.rstut.com/final_flash/Config_Challenge_8/Config_Challenge_8.html.
Note: If you are not sure about PPPoE, please read my PPPoE tutorial.

Troubleshooting Lab Challenge 2

June 7th, 2015 in Lab Challenge

We have just posted Troubleshooting Lab Challenge 2 on networktut.com based on the idea of TSHOOT exam. We also post a link here, maybe you will like it too:
http://www.networktut.com/troubleshooting-lab-challenge-2

Troubleshooting Lab Challenge 1

April 19th, 2015 in Lab Challenge

We have just posted a Troubleshooting Lab Challenge on networktut.com. It is based on the idea of TSHOOT exam. We also post a link here:
http://www.networktut.com/troubleshooting-lab-challenge-1

Hope you will like this simulator!

Lab Challenge 7 – Switch Config

February 9th, 2015 in Lab Challenge

Let’s continue with Lab Challenge 7 with same topology as other switching lab challenges!

Here is the link to access this lab: http://www.rstut.com/final_flash/Four_Switches_Lab_7/Four_Switches_Lab_7.html.
We are still working to add more Lab Challenges like this. If you have any challenges, commands or suggestions please comment here or send an email to support@rstut.com. Every contribution is warmly welcome!

Lab Challenge 6 – Switch Config

January 5th, 2015 in Lab Challenge

Let’s continue with Lab Challenge 6 with same topology as other switching lab challenges!

Here is the link to access this lab: http://www.rstut.com/final_flash/Four_Switches_Lab_6/Four_Switches_Lab_6.html.

Lab Challenge 5 – Switch Config

December 9th, 2014 in Lab Challenge

Let’s continue with Lab Challenge 5 with same topology as other lab challenges!

Here is the link to access this lab: http://www.rstut.com/final_flash/Four_Switches_Lab_5/Four_Switches_Lab_5.html.

Lab Challenge 4 – Switch Config

October 9th, 2014 in Lab Challenge

Let’s continue with Lab Challenge 4 with same topology as other lab challenges!

Here is the link to access this lab: http://www.rstut.com/final_flash/Four_Switches_Lab_4/Four_Switches_Lab_4.html.

Lab Challenge 3 – Switch Config

September 16th, 2014 in Lab Challenge

We continue releasing another lab of 4 switches using the same topology. Hope you like it too!

Here is the link to access this lab: http://www.rstut.com/final_flash/Four_Switches_Lab_3/Four_Switches_Lab_3.html.

Lab Challenge 2 – Switch Config

September 7th, 2014 in Lab Challenge

After the first Lab Challenge we made another lab of 4 switches. The topology of this lab is the same with the previous one. Hope you will enjoy this lab too.

Here is the link to access this lab: http://www.rstut.com/final_flash/Four_Switches_Lab_2/Four_Switches_Lab_2.html.

Lab Challenge 1 – Switch Config

August 26th, 2014 in Lab Challenge

In this lab you will config 4 switches which are interconnected with each other.

In our simulator, you can only use “?’ with a space before for seeing the next keywords (for example: “spanning ?”, not “spanning?”). The simulator can be accessed via this link: http://www.rstut.com/final_flash/Four_Switches_Lab_1/Four_Switches_Lab_1.html.
Please let us know if you like this simulator or not so that we can continue making other simulators in the future. Any suggestion, recommendation, error reports are warmly welcomed!